7.12.18 Reported Issues (READ BEFORE UPDATING)

by Mr-Mavrik on Wed Dec 02, 2009 6:35 am
IP:

Firmware 7.12.18 for V1.1

by Mr-Mavrik on Tue Nov 17, 2009 8:35 am
IP:

Firmware 7.16.22 for EFiX V1.1 Released

by LogicLight on Thu Mar 11, 2010 3:39 am
IP:

Step 1: Download the latest Control Center from here.
Note: The Control Center is only for OS X. There is no Windows Control Center.

Step 2: Install the Control Center by double clicking the downloaded file. An icon will appear in the System Preferences panel.
Note: If you already have an older Control Center installed you must first remove the old one before installing the new one. To do so, right click or control click on the Control Center icon and remove.

Step 3: Open the EFi-X Control Center in your System Preferences panel by clicking on the icon. Your EFi-X information should be displayed including version number, serial number, and current firmware installed on your EFi-X. To update, click "Update". A screen will be displayed with general warnings and information from ASEM. Click "OK" to agree. If there is an newer firmware available then it will automatically download and install.
Note: If your firmware is up to date you will get a message telling you "No New Update Found"

Step 4: Once your device is fully updated you will see a message showing 100% and "Complete". Once it is complete, shutdown your computer.

Step 5: Unplug your computer, reset the CMOS, plug your computer back in and turn it back on. Go into the bios and change all settings back to default. Restart your computer and adjust bios settings for the EFi-X.

most content on our site is from efix manufacturer site.

1. Make sure you are on the newest Control Center (currently 5.1)
2. Click "update" and let the update run till completion
3. After completion shut down your computer
4. Unplug the power cord and clear the CMOS
5. Turn back on, go into bios and reset to default. Restart.
6. Go back into bios and change all setting back to preferred settings and boot.

7. Follow our "EFIX bios configuration" guide.

you may download the EFiX UPDATE UTILITY "control Center" to update your efix usb firmware. Should you need our assistance updating your firmware, please send in your efix with your original order number and prepaid postage to the address below, please make sure to include prepaid postage from our office to your destination and your order number. Please ship your efix dongle only, no accessories necessary, efix usb only. Please ship to:

Firmware Update
ZouGate LLC
8930 Mission Drive Suite 107
Rosemead, CA 91770

If you can't connect to update server, it means the update server is down, we suggest you try later, as we do not have any control over the efix firmware update server; the server is control by efix manufacturer. if you can go online, then there is nothing wrong with your system or the efix usb unit, as your system has INTERNET access, in order to update efix firmware you must be connected to INTERNET. Please make sure you have the most updated "efix update control center" as only cureent version will allow you to connect to update firmware server. below is the link to ASEM's firmware update page. you may also download the "efix update control center" from our Quick Start Guide "latest efix firmware update" link.

ASEM's efix control center update page. click here.

There are few ways you can update your efix firmware, the best way is to use the "EFiX Update control Center"; please note only update your efix firmware if updating the known firmware will fix a known issue/s for you. if not we highly suggest not to update efix firmware, firmware should be treated with caution. 2nd way to update the firmware is to send to efix manufacture or send to efix authorized reseller or distributor. you may download the efix "updated control center from our site or efix manufacturer site. we wil have those link below. Please make sure you have the most updated control center as only the most updated version will be able to update the efix firmware, previous version will give "can't connect to update server" or other message, if you have the most updated control center and still getting the message "can't connect to the update server" it usually means efix manufacture is working on the server; only efix manufacture has the access to update firmware server. We ship with most updated frimware to date shipped.

Download "efix update control center from our site" click here.

Download "efix update control center from efix manufacture site" click here. (You will be redirected to efix manufacture site)

by Mr-Mavrik on Mon Dec 14, 2009 9:09 am
IP:

update firmware version is always a risk, and should be taken with caution. if everything working for you to your satisfaction, the answer is no. only update firmware version if there is a known issue which will be fix by updating your efix firmware. Efix usb v1/v1.01 current firmware version as of 11/2/09 5.7.16; the follow Operating Systems are supported; windows xp, windows vista, windows 7 and leopard up to 10.5.X to 10.5.8.

Please dowload the "efix update control center" install and and lanuch the update utility to check firmware version of your efix usb v1.01/v1/v1.1.

Here are few more questions for you>

Are you happy with your current configuration? if your answer is yes, do not update your firmware.
if answer is NO, please find out first, if your issue is solved, 2nd do not update your firmware the day it is out, please wait a week or more for other to report if there are any bugs, this is very important because we can't go downgrade firmware, once updated you are stuck, until new firmware out.